Google+
ITS and UVa logos for printed output

Video Over IP Encoder Service

Haivision Barracuda Checklist

This checklist should be used to confirm your receipt of all the materials you will need to use the Haivision Barracuda encoder. You should have received this checklist when you signed out the Haivision Barracuda from ITS. Make sure you have each of these items. If you find that something is missing or broken, you should immediately contact us.

You can also consult our Quickstart page, which offers a simple explanation of how to set up and operate the Haivision Barracuda encoder.

  1. Barracuda Encoder

    photo of Barracuda Encoder

    Please handle the encoder with care. Further description of the device and how to use it are located in the Quickstart guide.

  2. Power Supply unit and cord

    photo of power supply and cord

    The Barracuda power supply supports line voltages between 100V and 240V at 50/60Hz.

  3. Composite Video/Audio Cable

    photo of video/audio cable

    All you should need to operate the Barracuda encoder with the typical video camera setup is the yellow video composite cable and the red and white audio cable.

  4. LAN Cable

    photo of LAN cable

    The Barracuda only connects to a Local Area Network (LAN).

  5. Audio adaptor

    photo of audio adapter

    RCA female audio adaptor.

All these items should be in the suitcase. Please be sure to return all five.

  Page Updated: 2012-02-16